#include <xiaomi_body_scale.h>

Inheritance diagram for esphome::xiaomi_body_scale::XiaomiBodyScale:

Public Member Functions
	XiaomiBodyScale (uint64_t address, const char *bindkey)

bool	parse_device (const ble_device_base::ESPBTDevice &device) override

void	dump_config () override

void	set_weight (sensor::Sensor *weight)

void	set_impedance_low (sensor::Sensor *impedance_low)

void	set_impedance_high (sensor::Sensor *impedance_high)

void	set_heart_rate (sensor::Sensor *heart_rate)

void	set_profile_id (sensor::Sensor *profile_id)

void	set_stabilized (binary_sensor::BinarySensor *stabilized)

Public Member Functions inherited from esphome::Component
virtual void	setup ()
	Where the component's initialization should happen.

virtual void	loop ()
	This method will be called repeatedly.

virtual float	get_setup_priority () const
	priority of setup().

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

bool	is_idle () const
	Check if this component is idle.

void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const LogString *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning ()

void	status_set_warning (const char *message)

void	status_set_warning (const LogString *message)

void	status_set_error ()

void	status_set_error (const LogString *message)

void	status_clear_warning ()

void	status_clear_error ()

	ESPDEPRECATED ("Use status_momentary_warning() without a name. Removed in 2027.5.0", "2026.11.0") void status_momentary_warning(const char *name

void	status_momentary_warning (uint32_t length=5000)
	Set warning status flag and clear it after `length` ms.

void	status_momentary_warning (const LogString *message, uint32_t length=5000)

	ESPDEPRECATED ("Use status_momentary_error() without a name. Removed in 2027.5.0", "2026.11.0") void status_momentary_error(const char *name

void	status_momentary_error (uint32_t length=5000)
	Set error status flag and clear it after `length` ms.

void	status_momentary_error (const LogString *message, uint32_t length=5000)

bool	has_overridden_loop () const

const LogString *	get_component_log_str () const ESPHOME_ALWAYS_INLINE
	Get the integration where this component was declared as a LogString for logging.

bool	should_warn_of_blocking (uint32_t blocking_time, uint32_t &threshold_ms_out)

Public Member Functions inherited from esphome::ble_device_base::ESPBTDeviceListener
virtual	~ESPBTDeviceListener ()=default

virtual void	on_scan_end ()
	Called at the end of each scan duration period.

Protected Member Functions
bool	decrypt_ (const uint8_t frame, uint8_t plaintext) const

void	publish_s400_ (uint32_t packed)

void	publish_stabilized_ (bool stabilized)

Protected Member Functions inherited from esphome::Component
friend	void::setup ()

friend	void::original_setup ()

void	set_component_source_ (uint8_t index)
	Set where this component was loaded from for some debug messages.

virtual void	call_setup ()

void	call_dump_config_ ()

void	enable_loop_slow_path_ ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

bool	set_status_flag_ (uint8_t flag)
	Helper to set a status LED flag on both this component and the app.

bool	set_error_flag_ (const LogString *message)
	Set the error flag and log it; true when it was not set before.

void	set_interval (const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a const char* name.

void	set_interval (uint32_t id, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a numeric ID (zero heap allocation).

void	set_interval (InternalSchedulerID id, uint32_t interval, std::function< void()> &&f)

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const char *name)
	Cancel an interval function.

bool	cancel_interval (uint32_t id)

bool	cancel_interval (InternalSchedulerID id)

void	set_timeout (const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a const char* name.

void	set_timeout (uint32_t id, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a numeric ID (zero heap allocation).

void	set_timeout (InternalSchedulerID id, uint32_t timeout, std::function< void()> &&f)

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const char *name)
	Cancel a timeout function.

bool	cancel_timeout (uint32_t id)

bool	cancel_timeout (InternalSchedulerID id)

void	defer (const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call with a const char* name.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (uint32_t id, std::function< void()> &&f)
	Defer a callback with a numeric ID (zero heap allocation)

bool	cancel_defer (const char *name)
	Cancel a defer callback using the specified name, name must not be empty.

bool	cancel_defer (uint32_t id)

void	status_clear_warning_slow_path_ ()

void	status_clear_error_slow_path_ ()

Protected Attributes
uint64_t	address_

uint8_t	bindkey_ [16]

sensor::Sensor *	weight_ {nullptr}

sensor::Sensor *	impedance_low_ {nullptr}

sensor::Sensor *	impedance_high_ {nullptr}

sensor::Sensor *	heart_rate_ {nullptr}

sensor::Sensor *	profile_id_ {nullptr}

binary_sensor::BinarySensor *	stabilized_ {nullptr}

uint16_t	last_frame_count_ {0x100}

Protected Attributes inherited from esphome::Component
uint8_t	component_source_index_ {0}
	Index into component source PROGMEM lookup table (0 = not set)

uint8_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_CS}
	Warn threshold in centiseconds (max 2550ms)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bit 5: Has overridden loop() (set at registration time) Bits 6-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

ComponentRuntimeStats	runtime_stats_

Additional Inherited Members
Data Fields inherited from esphome::Component
uint32_t	length = 5000)

Detailed Description

Definition at line 10 of file xiaomi_body_scale.h.

Constructor & Destructor Documentation

◆ XiaomiBodyScale()

esphome::xiaomi_body_scale::XiaomiBodyScale::XiaomiBodyScale	(	uint64_t	address,
		const char *	bindkey )

Definition at line 29 of file xiaomi_body_scale.cpp.

Member Function Documentation

◆ decrypt_()

bool esphome::xiaomi_body_scale::XiaomiBodyScale::decrypt_	(	const uint8_t *	frame,
		uint8_t *	plaintext ) const

protected

Definition at line 49 of file xiaomi_body_scale.cpp.

◆ dump_config()

void esphome::xiaomi_body_scale::XiaomiBodyScale::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 33 of file xiaomi_body_scale.cpp.

◆ parse_device()

bool esphome::xiaomi_body_scale::XiaomiBodyScale::parse_device ( const ble_device_base::ESPBTDevice & device )

overridevirtual

Implements esphome::ble_device_base::ESPBTDeviceListener.

Definition at line 97 of file xiaomi_body_scale.cpp.

◆ publish_s400_()

void esphome::xiaomi_body_scale::XiaomiBodyScale::publish_s400_ ( uint32_t packed )

protected

Definition at line 69 of file xiaomi_body_scale.cpp.

◆ publish_stabilized_()

void esphome::xiaomi_body_scale::XiaomiBodyScale::publish_stabilized_ ( bool stabilized )

protected

Definition at line 60 of file xiaomi_body_scale.cpp.

◆ set_heart_rate()

void esphome::xiaomi_body_scale::XiaomiBodyScale::set_heart_rate ( sensor::Sensor * heart_rate )

inline

Definition at line 20 of file xiaomi_body_scale.h.

◆ set_impedance_high()

void esphome::xiaomi_body_scale::XiaomiBodyScale::set_impedance_high ( sensor::Sensor * impedance_high )

inline

Definition at line 19 of file xiaomi_body_scale.h.

◆ set_impedance_low()

void esphome::xiaomi_body_scale::XiaomiBodyScale::set_impedance_low ( sensor::Sensor * impedance_low )

inline

Definition at line 18 of file xiaomi_body_scale.h.

◆ set_profile_id()

void esphome::xiaomi_body_scale::XiaomiBodyScale::set_profile_id ( sensor::Sensor * profile_id )

inline

Definition at line 21 of file xiaomi_body_scale.h.

◆ set_stabilized()

void esphome::xiaomi_body_scale::XiaomiBodyScale::set_stabilized ( binary_sensor::BinarySensor * stabilized )

inline

Definition at line 22 of file xiaomi_body_scale.h.

◆ set_weight()

void esphome::xiaomi_body_scale::XiaomiBodyScale::set_weight ( sensor::Sensor * weight )

inline

Definition at line 17 of file xiaomi_body_scale.h.

Field Documentation

◆ address_

uint64_t esphome::xiaomi_body_scale::XiaomiBodyScale::address_

protected

Definition at line 29 of file xiaomi_body_scale.h.

◆ bindkey_

uint8_t esphome::xiaomi_body_scale::XiaomiBodyScale::bindkey_[16]

protected

Definition at line 30 of file xiaomi_body_scale.h.

◆ heart_rate_

sensor::Sensor* esphome::xiaomi_body_scale::XiaomiBodyScale::heart_rate_ {nullptr}

protected

Definition at line 34 of file xiaomi_body_scale.h.

◆ impedance_high_

sensor::Sensor* esphome::xiaomi_body_scale::XiaomiBodyScale::impedance_high_ {nullptr}

protected

Definition at line 33 of file xiaomi_body_scale.h.

◆ impedance_low_

sensor::Sensor* esphome::xiaomi_body_scale::XiaomiBodyScale::impedance_low_ {nullptr}

protected

Definition at line 32 of file xiaomi_body_scale.h.

◆ last_frame_count_

uint16_t esphome::xiaomi_body_scale::XiaomiBodyScale::last_frame_count_ {0x100}

protected

Definition at line 37 of file xiaomi_body_scale.h.

◆ profile_id_

sensor::Sensor* esphome::xiaomi_body_scale::XiaomiBodyScale::profile_id_ {nullptr}

protected

Definition at line 35 of file xiaomi_body_scale.h.

◆ stabilized_

binary_sensor::BinarySensor* esphome::xiaomi_body_scale::XiaomiBodyScale::stabilized_ {nullptr}

protected

Definition at line 36 of file xiaomi_body_scale.h.

◆ weight_

sensor::Sensor* esphome::xiaomi_body_scale::XiaomiBodyScale::weight_ {nullptr}

protected

Definition at line 31 of file xiaomi_body_scale.h.

The documentation for this class was generated from the following files:

esphome/components/xiaomi_body_scale/xiaomi_body_scale.h
esphome/components/xiaomi_body_scale/xiaomi_body_scale.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ XiaomiBodyScale()

Member Function Documentation

◆ decrypt_()

◆ dump_config()

◆ parse_device()

◆ publish_s400_()

◆ publish_stabilized_()

◆ set_heart_rate()

◆ set_impedance_high()

◆ set_impedance_low()

◆ set_profile_id()

◆ set_stabilized()

◆ set_weight()

Field Documentation

◆ address_

◆ bindkey_

◆ heart_rate_

◆ impedance_high_

◆ impedance_low_

◆ last_frame_count_

◆ profile_id_

◆ stabilized_

◆ weight_