#include <mopeka_pro_check.h>

Inheritance diagram for esphome::mopeka_pro_check::MopekaProCheck:

Public Member Functions
void	set_address (uint64_t address)

bool	parse_device (const esp32_ble_tracker::ESPBTDevice &device) override
	Main parse function that gets called for all ble advertisements.

void	dump_config () override

void	set_min_signal_quality (SensorReadQuality min)

void	set_level (sensor::Sensor *level)

void	set_temperature (sensor::Sensor *temperature)

void	set_battery_level (sensor::Sensor *bat)

void	set_distance (sensor::Sensor *distance)

void	set_signal_quality (sensor::Sensor *rq)

void	set_ignored_reads (sensor::Sensor *ir)

void	set_tank_full (float full)

void	set_tank_empty (float empty)

Public Member Functions inherited from esphome::Component
virtual void	setup ()
	Where the component's initialization should happen.

virtual void	loop ()
	This method will be called repeatedly.

virtual float	get_setup_priority () const
	priority of setup().

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

bool	is_idle () const
	Check if this component is idle.

void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const LogString *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning ()

void	status_set_warning (const char *message)

void	status_set_warning (const LogString *message)

void	status_set_error ()

void	status_set_error (const LogString *message)

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const char *name, uint32_t length=5000)
	Set warning status flag and automatically clear it after a timeout.

void	status_momentary_error (const char *name, uint32_t length=5000)
	Set error status flag and automatically clear it after a timeout.

bool	has_overridden_loop () const

const LogString *	get_component_log_str () const ESPHOME_ALWAYS_INLINE
	Get the integration where this component was declared as a LogString for logging.

bool	should_warn_of_blocking (uint32_t blocking_time, uint32_t &threshold_ms_out)

Public Member Functions inherited from esphome::esp32_ble_tracker::ESPBTDeviceListener
virtual bool	parse_devices (const BLEScanResult *scan_results, size_t count)

virtual AdvertisementParserType	get_advertisement_parser_type ()

void	set_parent (ESP32BLETracker *parent)

Public Member Functions inherited from esphome::ble_device_base::ESPBTDeviceListener
virtual	~ESPBTDeviceListener ()=default

virtual void	on_scan_end ()
	Called at the end of each scan duration period.

Protected Member Functions
uint8_t	parse_battery_level_ (const std::vector< uint8_t > &message)

uint32_t	parse_distance_ (const std::vector< uint8_t > &message)

int8_t	parse_temperature_ (const std::vector< uint8_t > &message)

SensorReadQuality	parse_read_quality_ (const std::vector< uint8_t > &message)

Protected Member Functions inherited from esphome::Component
friend	void::setup ()

friend	void::original_setup ()

void	set_component_source_ (uint8_t index)
	Set where this component was loaded from for some debug messages.

virtual void	call_setup ()

void	call_dump_config_ ()

void	enable_loop_slow_path_ ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

bool	set_status_flag_ (uint8_t flag)
	Helper to set a status LED flag on both this component and the app.

void	set_interval (const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a const char* name.

void	set_interval (uint32_t id, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a numeric ID (zero heap allocation).

void	set_interval (InternalSchedulerID id, uint32_t interval, std::function< void()> &&f)

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const char *name)
	Cancel an interval function.

bool	cancel_interval (uint32_t id)

bool	cancel_interval (InternalSchedulerID id)

void	set_timeout (const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a const char* name.

void	set_timeout (uint32_t id, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a numeric ID (zero heap allocation).

void	set_timeout (InternalSchedulerID id, uint32_t timeout, std::function< void()> &&f)

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const char *name)
	Cancel a timeout function.

bool	cancel_timeout (uint32_t id)

bool	cancel_timeout (InternalSchedulerID id)

void	defer (const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call with a const char* name.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (uint32_t id, std::function< void()> &&f)
	Defer a callback with a numeric ID (zero heap allocation)

bool	cancel_defer (const char *name)
	Cancel a defer callback using the specified name, name must not be empty.

bool	cancel_defer (uint32_t id)

void	status_clear_warning_slow_path_ ()

void	status_clear_error_slow_path_ ()

Protected Attributes
uint64_t	address_

sensor::Sensor *	level_ {nullptr}

sensor::Sensor *	temperature_ {nullptr}

sensor::Sensor *	distance_ {nullptr}

sensor::Sensor *	battery_level_ {nullptr}

sensor::Sensor *	read_quality_ {nullptr}

sensor::Sensor *	ignored_reads_ {nullptr}

uint32_t	full_mm_

uint32_t	empty_mm_

uint32_t	ignored_read_count_ = 0

SensorReadQuality	min_signal_quality_ = QUALITY_MED

Protected Attributes inherited from esphome::Component
uint8_t	component_source_index_ {0}
	Index into component source PROGMEM lookup table (0 = not set)

uint8_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_CS}
	Warn threshold in centiseconds (max 2550ms)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bit 5: Has overridden loop() (set at registration time) Bits 6-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

ComponentRuntimeStats	runtime_stats_

Protected Attributes inherited from esphome::esp32_ble_tracker::ESPBTDeviceListener
ESP32BLETracker *	parent_ {nullptr}

Detailed Description

Definition at line 30 of file mopeka_pro_check.h.

Member Function Documentation

◆ dump_config()

void esphome::mopeka_pro_check::MopekaProCheck::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 13 of file mopeka_pro_check.cpp.

◆ parse_battery_level_()

uint8_t esphome::mopeka_pro_check::MopekaProCheck::parse_battery_level_ ( const std::vector< uint8_t > & message )

protected

Definition at line 126 of file mopeka_pro_check.cpp.

◆ parse_device()

bool esphome::mopeka_pro_check::MopekaProCheck::parse_device ( const esp32_ble_tracker::ESPBTDevice & device )

overridevirtual

Main parse function that gets called for all ble advertisements.

Check if advertisement is for our sensor and if so decode it and update the sensor state data.

Reimplemented from esphome::esp32_ble_tracker::ESPBTDeviceListener.

Definition at line 28 of file mopeka_pro_check.cpp.

◆ parse_distance_()

uint32_t esphome::mopeka_pro_check::MopekaProCheck::parse_distance_ ( const std::vector< uint8_t > & message )

protected

Definition at line 139 of file mopeka_pro_check.cpp.

◆ parse_read_quality_()

SensorReadQuality esphome::mopeka_pro_check::MopekaProCheck::parse_read_quality_ ( const std::vector< uint8_t > & message )

protected

Definition at line 150 of file mopeka_pro_check.cpp.

◆ parse_temperature_()

int8_t esphome::mopeka_pro_check::MopekaProCheck::parse_temperature_ ( const std::vector< uint8_t > & message )

protected

Definition at line 148 of file mopeka_pro_check.cpp.

◆ set_address()

void esphome::mopeka_pro_check::MopekaProCheck::set_address ( uint64_t address )

inline

Definition at line 32 of file mopeka_pro_check.h.

◆ set_battery_level()

void esphome::mopeka_pro_check::MopekaProCheck::set_battery_level ( sensor::Sensor * bat )

inline

Definition at line 40 of file mopeka_pro_check.h.

◆ set_distance()

void esphome::mopeka_pro_check::MopekaProCheck::set_distance ( sensor::Sensor * distance )

inline

Definition at line 41 of file mopeka_pro_check.h.

◆ set_ignored_reads()

void esphome::mopeka_pro_check::MopekaProCheck::set_ignored_reads ( sensor::Sensor * ir )

inline

Definition at line 43 of file mopeka_pro_check.h.

◆ set_level()

void esphome::mopeka_pro_check::MopekaProCheck::set_level ( sensor::Sensor * level )

inline

Definition at line 38 of file mopeka_pro_check.h.

◆ set_min_signal_quality()

void esphome::mopeka_pro_check::MopekaProCheck::set_min_signal_quality ( SensorReadQuality min )

inline

Definition at line 36 of file mopeka_pro_check.h.

◆ set_signal_quality()

void esphome::mopeka_pro_check::MopekaProCheck::set_signal_quality ( sensor::Sensor * rq )

inline

Definition at line 42 of file mopeka_pro_check.h.

◆ set_tank_empty()

void esphome::mopeka_pro_check::MopekaProCheck::set_tank_empty ( float empty )

inline

Definition at line 45 of file mopeka_pro_check.h.

◆ set_tank_full()

void esphome::mopeka_pro_check::MopekaProCheck::set_tank_full ( float full )

inline

Definition at line 44 of file mopeka_pro_check.h.

◆ set_temperature()

void esphome::mopeka_pro_check::MopekaProCheck::set_temperature ( sensor::Sensor * temperature )

inline

Definition at line 39 of file mopeka_pro_check.h.

Field Documentation

◆ address_

uint64_t esphome::mopeka_pro_check::MopekaProCheck::address_

protected

Definition at line 48 of file mopeka_pro_check.h.

◆ battery_level_

sensor::Sensor* esphome::mopeka_pro_check::MopekaProCheck::battery_level_ {nullptr}

protected

Definition at line 52 of file mopeka_pro_check.h.

◆ distance_

sensor::Sensor* esphome::mopeka_pro_check::MopekaProCheck::distance_ {nullptr}

protected

Definition at line 51 of file mopeka_pro_check.h.

◆ empty_mm_

uint32_t esphome::mopeka_pro_check::MopekaProCheck::empty_mm_

protected

Definition at line 57 of file mopeka_pro_check.h.

◆ full_mm_

uint32_t esphome::mopeka_pro_check::MopekaProCheck::full_mm_

protected

Definition at line 56 of file mopeka_pro_check.h.

◆ ignored_read_count_

uint32_t esphome::mopeka_pro_check::MopekaProCheck::ignored_read_count_ = 0

protected

Definition at line 58 of file mopeka_pro_check.h.

◆ ignored_reads_

sensor::Sensor* esphome::mopeka_pro_check::MopekaProCheck::ignored_reads_ {nullptr}

protected

Definition at line 54 of file mopeka_pro_check.h.

◆ level_

sensor::Sensor* esphome::mopeka_pro_check::MopekaProCheck::level_ {nullptr}

protected

Definition at line 49 of file mopeka_pro_check.h.

◆ min_signal_quality_

SensorReadQuality esphome::mopeka_pro_check::MopekaProCheck::min_signal_quality_ = QUALITY_MED

protected

Definition at line 59 of file mopeka_pro_check.h.

◆ read_quality_

sensor::Sensor* esphome::mopeka_pro_check::MopekaProCheck::read_quality_ {nullptr}

protected

Definition at line 53 of file mopeka_pro_check.h.

◆ temperature_

sensor::Sensor* esphome::mopeka_pro_check::MopekaProCheck::temperature_ {nullptr}

protected

Definition at line 50 of file mopeka_pro_check.h.

The documentation for this class was generated from the following files:

esphome/components/mopeka_pro_check/mopeka_pro_check.h
esphome/components/mopeka_pro_check/mopeka_pro_check.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Member Function Documentation

◆ dump_config()

◆ parse_battery_level_()

◆ parse_device()

◆ parse_distance_()

◆ parse_read_quality_()

◆ parse_temperature_()

◆ set_address()

◆ set_battery_level()

◆ set_distance()

◆ set_ignored_reads()

◆ set_level()

◆ set_min_signal_quality()

◆ set_signal_quality()

◆ set_tank_empty()

◆ set_tank_full()

◆ set_temperature()

Field Documentation

◆ address_

◆ battery_level_

◆ distance_

◆ empty_mm_

◆ full_mm_

◆ ignored_read_count_

◆ ignored_reads_

◆ level_

◆ min_signal_quality_

◆ read_quality_

◆ temperature_